Product

Details

Aquaproof Cement Primer Premium is an acrylic co-polymer based superior primer for exterior. Aquaproof Cement Primer Premium with high grip & bonding capacity is a perfect primer to form a tougher yet flexible film, which adheres wonderfully to the surface applied. It is highly recommended for all kinds of emulsion paints. Use Aquaproof Cement Primer Premium for priming before painting.

WHERE TO USE: It can be applied for priming on all types of exterior cement walls (RCC, asbestos sheet, concrete brick etc.) It does not require any type of curing or other coat like cement wash.

HOW TO USE:
(A) SURFACE PREPARATION: Ensure that the surface is structurally sound and free from dust, loose & poorly bonded materials. Any fault or damage in the structure which may cause moisture, dampness, water penetration should be repaired.
(B) DILUTION: Dilute Aquaproof Cement Primer Premium in up to 50% of clean potable water and apply diluted primer with a brush or roller. Let it dry for 4-6 hours before application of paint.

  • No curing required.
  • Forming a seal coat which is non-absorbent.
  • Enhanced, better finish.
  • Possible to increase coverage of paint.
  • It creates toughness for walls.
  • It is flexible.
  • It is economical.
  • It gives good support to paint which protects it from sun & heavy rain.
  • Free of chlorides, sulphates, phosphates and nitrates.
  • Ready mix and easy to use
  • One 25kg sack of Aqua Grout Gp yields 22.5 liters of grout.
  • In less demanding applications, the yield can be increased by mixing clean and sound 10mm of Aqua Grout Gp and aggregates in the proportion of 1:1 by volumeTM AQUA GROUT GP-30, 60 & 90 (Industrial Grout - General Purpose) ® with reduced flow.
  • Available in various strength levels to fit everybody’s needs.
90-95 sq.ft. is covered per litre/coat
Do not over thin or over extend the brush. Stir the primer well and strain before use. Do not apply when ambient temperature is less than 10°C. To remove persistent fungus/algae deposits (seen as black patches), apply 1:10 (1Ltr biowash & 10Ltr water) diluted solution on areas with brush. After 1 hour, clean the biowash applied surface with water and light brushing with coir brush. On dusty porous surfaces apply additional coat of primer for better adhesion. It is not recommended to apply putty coat over the priming coat.
2 years from date of manufacture in tightly closed container away from direct sunlight and excessive heat.
Aquaproof Cement Primer Premium is available in 1, 4, 10 & 20Ltr attractive plastic container.
Standard Carton packing:
1Ltr: 12 cans per carton.
4Ltr: 4 cans per carton.
10Ltr: Single bucket.
20Ltr: Single bucket.

Product

Brochure
gdpr-image
This website uses cookies to improve your experience. By using this website you agree to our Data Protection Policy.